How to Add Rod Length to a York Pendant Light

Quick Answer

To add rod length to a York Pendant light, purchase compatible down rod extensions at the same time as your fixture and follow the steps below to safely extend the hanging height.

Steps to Add Rod Length to a York Pendant

1. 1. Measure Your Desired Hanging Height: Decide how low you want the bottom of the pendant to hang from the ceiling. For a dining table, aim for 30-36 inches above the tabletop. Subtract the fixture height (23 inches for the York Pendant) and the included 4-inch rod from your total drop to determine the extra length needed. Common mistake: forgetting to account for the fixture height itself, which can make the pendant hang lower than intended.
2. 2. Order the Right Down Rod Extensions: Purchase the required number of down rod extensions (available in 4"-16" lengths) at the same time as your York Pendant. Add enough to reach your target height. For example, if you need an extra 12 inches, order one 12-inch extension or combine a 4-inch and an 8-inch. Checkpoint: order extensions with the fixture to ensure finish and thread compatibility.
3. 3. Assemble the Rods During Installation: When installing the York Pendant, thread the down rod extensions together before attaching to the fixture canopy. Hand-tighten each connection. Ensure the wires pass through the hollow rods without pinching. Follow the fixture's wiring instructions for safe electrical connection. Common mistake: overtightening can strip threads; hand-tighten only.
4. 4. Secure and Test the Height: After assembly, lift the pendant and attach the canopy to the ceiling bracket. Have a helper hold the fixture while you verify the height. Adjust by adding or removing a rod section if needed before final tightening. Checkpoint: always test the height before securing all connections to avoid rework.

Product Facts

• Add Rod Length: Down rod extensions are sold in 4"-16" lengths and are meant to be purchased at the same time as your light fixture. Ordering extensions with the York Pendant ensures finish and thread match, avoiding delays or compatibility issues.

  

• York Pendant 20": The York Pendant 20" includes a 4" down rod and is UL and cUL listed for damp locations. The included 4" rod works for standard 8-foot ceilings, but higher ceilings require extensions to achieve the ideal hanging height.